First carefully peel the covered parts off the mirror and out of the frame. Then gently pry the mirror away from the.
Next cut or snap some.
How to get a mirror out of a compact. By putting it in water the glue will eventually break off. This is also why it should be a cheap compact they re pretty easy to take apart. To begin this brilliant project pull apart quite a few dollar store compacts.
Favorite answer it s probably glued in with a really good glue especially if it s a good compact. Start by sticking some shims between the wall and mirror to create a little more space between them. Get a piece of plywood that s large enough to be used as a backing for your mirror.
Try soaking it in lacquer thinner an acetone solvent. Push it down the side and push up it should pop out once all the glue has come off. Wrap the mirror in bubble wrap or an old blanket you don t mind throwing.
Then wedge the crowbar at one edge of the mirror. Gently apply pressure to see if you can get that edge to lift from the wall. Many people have luck prying at the mirror with a crowbar.
Remove the mirror from each then arrange them on a flat surface into your own unique design. Cut the mirror away from the bottom part of the compact with the pliers you may want to wear safety glasses in. The compact i had was held together with just a glue so it was pretty easy.
The more tape you use the better protected the mirror so add extra strips of tape across the glass for even less risk.