If your iphone won t charge or only charges when plugged into a specific charging cable car charger or external charging brick you may be able to resolve the problem by cleaning the charging lightning port. Reset iphone in black screen without home button.
Use canned air a mini vac a post it note a toothpick or some combination of these common tools to effect a do it yourself repair.
How to get rid of black spot on iphone charger. Step 3 after the iphone reboots it should get rid of the black screen of death. It sounds like the lcd is damaged. Let that sit for 5 days.
Holding your iphone so the backside is facing up place the toothpick inside the charging port. I haven t seen it on an iphone bu. This will take a lot of poking and scraping.
Replacement is the only viable option either the lcd or the entire phone. Then u put water in it just a little for 10 days then put it in a dry soft towel or something. In many cases when the pin becomes black one side of the lighting cable stops working.
A damaged charger can damage your phone and it s not worth saving a few bucks on a new charger if it s going to ruin your phone. The outside black spot isn t the problem it s whatever damage might have happened to the internals. From what you ve described it s likely heat damage rather than some sort or bump or physical trauma.
Yet this phone has a huge black spot on it and it blocks my games. Step 2 wait until the apple logo appears on the screen. This is certainly true in my cable s case as i can only charge and sync my iphone from one side of the cable as other ones doesn t work at all making the problem particularly annoying.
It may get worse in time so the only way to get the display fixed is to replace the lcd in the display or for an easier repair replace the whole display lcd digitizer. Continue to do this until the debris starts to come loose. It likely has a crack in the lcd which can cause the dark spot and also the various lines of color.
Step 1 press and hold the sleep wake and the home key for about ten seconds. Scrape against the back wall of the port. Please don t use the cords after they start to look like that.
The lcd in your display has been damaged. This is what u do put it in 90 or higher rubbing alcohol or peroxide.