If you re feeling up for manual labor destroying that tree stump with a pick ax is another way to get rid of that pesky stump. You can get a professional out to remove your stump but there are also a few ways you can remove your stump yourself.
You don t need a stump grinder or a tractor to remove a tree stump.
How to get rid of a stump without a grinder. Cover the stump with a plastic tarp. The top 3 methods to remove a tree stump without a grinder are. Here are 12 ways for how to remove a tree stump by hand with tools you have around the house.
Remove the top portion of the trunk leaving roughly 2ft of trunk exposed for leverage. Use a hand saw reciprocation saw or chainsaw to sever the major roots from the stump. Wait 4 to 6 weeks for the chemicals to accelerate the rotting process in the stump.
The number of holes drilled will vary due to stump size but should be spaced approximately 4 inches apart. Each hole should be approximately 3 inches from the edge of the stump. Step 1 drill 12 inch deep holes around the perimeter of the tree stump using your drill.
Use a chainsaw or limbing saw to remove any lower branches. To remove a tree stump by hand first dig around the trunk to expose the major roots. Soak the ground all around the stump.
The fastest way to remove a tree stump without using a grinder is the chemical method. To use this method you would want to employ the following steps. Pour tree stump removal chemicals into the holes pour 3 to 4 ounces of tree stump removal chemicals into each of the holes in granule form then fill the holes with water so the chemicals can soak in.
By hand chemical burn it out. Steps to rotting a tree stump. To manually remove the roots and pull the stump out of the soil use an ax or chainsaw to cut the tree down as low to the soil as possible and then use a crowbar or other tool with leverage to pull out the stump.
The tarp will act as a barrier to help retain moisture in and around the stump. Fill these holes first with water then with a fertilizer high in nitrogen or stump remover granules. By applying chemicals to holes drilled into the stump you speed up the natural decay process and the remaining tree fibers and roots will breakdown more quickly.
Stump removal can be expensive especially on top of the cost to remove the tree.