Shop vac will blow but won t suck i was going to say the seal your getting is probably not good on the lid to the tank or how ever it is if you put your hand over the sucking hole and press on the lid or twist see if it pops down and it may be warped plastic or some thing or some junk holding up a small section and not letting it seal. Checking out your filter.
Usually there are two clips holding it on.
How to get a shop vac to blow air. He switched the hose around. Voila you re already blowing air through the system. Not all shop vacs have a blower function.
Next determine if the filter is damaged by ensuring the wet vac is turned off and inspect it to ensure there are no holes or visible damages to the filter. If yours does not have this option here are the steps to make it blow air out. If it does you usually just remove the hose from the inlet and put it into the outlet to make it blow.
Nothing like a kid to make you feel dumb thanks for all the help. It worked fine the last time he used it. To check out your filter remove the top.
Turn the shop vac on and use the hose as a blower. Insert the hose in the exhaust port of the shop vac. To convert your wet dry shop vac into a blower.
My husbands shop vac just started blowing air instead of sucking. The powerful vacuum motor which easily sucks up twigs and wet objects can just as effectively blow them away with a simple adjustment of the hose. First shut off the vacuum and remove the top of the shop vac to inspect the filter.
This is a handy feature if you need to do some minor cleanup in your backyard and a leaf blower is not available. This is weird anybody got any ideas. Either your filter is clogged missing loose or the dust is too fine.
Many shop vac brand vacuums can easily be converted into blowers. If you have one of these machines all you have to do is flick the switch and you can use the vacuum cleaner to blow air outwards. Get that water out use your shopvac to remove water being blown out of the skimmer until it s dry.
Remove the shop vac motor from the base. Keep an eye out watch your return lines and skimmer. Take the hose out of the vacuum port on the shop vac.
How to make a vacuum cleaner blow air out most vacuum cleaners come with a dual function that allows you to either blow or suck air. A shop vac type vacuum blowing dust out the back is always a filter problem. Make sure the foam filter is in place and a clean filter bag is in place to catch all of the dry debris.
But once you clean or replace the filter the problem goes away. If the outlet is not accessible either with or without removing the cover over it your shop vac can not be made to blow. Guess we should have asked the 10 year old.
You ll want to keep your shop vac or air compressor on until you see bubbles coming out of your jets and your skimmer.