Slip a wrench onto the adapter flats and crank away while you apply air hammer blows. No tools needed for m.
The dual forces break the bolt loose.
How to get a stuck bolt out of a socket. List of tools used. Start by rocking the bolt by tightening then loosing this may be all you need to break through the rust. Three to four threads into the hole prevents the hole from being damaged as you remove the socket from the head of the bolt.
Their approach which is doable at home if you have the equipment was to weld nuts to the surface of the stuck bolts then grab them with a socket wrench no chance of cam out. Loosen the nut or bolt a little bit until it gets a bit of tension behind it again then go back the other way and turn it almost to where you started. A quick video from mike green at 1a auto that shows what you can do if you get a nut or bolt stuck in a socket.
Socket stuck on the bolt step 1 thread the bolt back into the hole two or three times if the bolt had already been removed. With enough force the bolt should loosen and unscrew. Hold on the very end of the wrench and pull by exerting constant steady pressure.
With bolts you can use some locking jaw pliers to grab the bolt head and turn the bolt out usually the relief cuts will let the pliers squeeze the head of the bolt enough that you can turn it out easily. To get bolt heads out of a socket use penetrating oil and heat them up and take a screw driver and hammer and knock the bolt out or tap it on a hard surface or find a bolt thread and screw it in a.